ETC Alex M Alex MX - Manual (Page 37)

Providing light automatically Creating a chase with the chaser function
Alex M
030430-150B
Alex_M_E_150C_A5.doc
– 37 –
Creating a chase with the chaser function
Setting the fade time
The fade time is the time taken for the first preset to fade in, for the first
preset to crossfade to the second, and so on.
1 Press [Page] to call menu page 3,
Memory/Chaser.
2 Use the knob to move the selection
cursor to the FADE field.
3 Press
[Edit] and use the knob to set the
desired fade time ( 0.0 seconds in the
figure).
• Applies to all presets.
Fig. 23: Setting the fade time
• Value range: 0.0 to 999.0 (seconds)
4 Press [Save] to save the selected fade time.
Setting the wait time for presets
The wait time is the period of time for which each preset remains on at full
power in the case of chase lighting.
1 Press [Page] to call menu page 3,
Memory/Chaser.
2 Use the knob to move the selection
cursor to the SPEED field.
3 Press [Edit] and use the knob to set the
desired wait time of the presets
(
1.0 seconds in the figure).
• Applies to all presets. Fig. 24: Setting the wait time
• Value range: 0.0 to 999.0 (seconds)
4 Press [Save] to save the selected wait time.