ETC Alex M Alex MX - Manual (Page 11)

Safety Important rules
Alex M
030430-150B
Alex_M_E_150C_A5.doc
– 11 –
Important rules
It is not dangerous to work with Alex M. Protective insulation and a whole
series of other protective measures ensure that you cannot come into
contact with any harmful electric currents. However, as with all electrical
equipment, you will need to observe a few simple rules:
• Never switch on equipment that is obviously damaged. Send
the equipment to an authorized dealer or back to the factory
for repairs.
• If there is any reason to suspect a fault, unplug the
equipment from the mains supply immediately. Make sure
that it cannot be started up again and send it to an
authorized dealer or back to the factory for repairs.
• Always unplug equipment from the power supply before
opening it.
• Components inside the equipment can be very hot if they
have only just been switched off.
Repairs are only ever to be made by an authorized dealer or by
transtechnik.