ETC Alex M Alex MX - Manual (Page 18)

Basic settings Working with Alex M
– 18 –
Alex M
030430-150B
Alex_M_E_150C_A5.doc
Basic settings
Before you start, you can rest assured:
The device is ready for operation immediately even if you don’t
make any basic settings.
Before you start working with Alex M, you should nevertheless have a look
at selected basic settings (there are a total of 12). You can use them to
customize Alex M to suit your exact requirements.
To make working with the device easier for you, you can set the menu
language and display contrast, for example. Then select the signal source
and the DMX start address. The reset function allows you, if you wish, to
reset the device to the factory settings.
These five steps are described on the following pages.
Language selection
Currently, the menu texts can be displayed in five languages:
English – German – Dutch – Italian – Spanish.
The factory setting is English. To set another language, proceed as follows:
1 Press [Page] until menu page 4, Basic
Settings, appears.
2 Turn the knob until the LANGUAGE
field is highlighted.
• The currently set language is
highlighted.
3 Press [Edit].
4 Use the knob to select a language.
Fig. 3: Basic Settings menu
Active field: LANGUAGE
5 Use [Save] to save the language you
have selected.
Grundeinstellungen