ETC Alex M Alex MX - Manual (Page 45)

The menu pages Menu page 2: Parameters
Alex M
030430-150B
Alex_M_E_150C_A5.doc
– 45 –
Input fields for each channel individually
LEV Internal contribution to the output level
Value range: 0 to FF (0% to 100%)
STA Status display
−
E
P Circuit closed, no error
Circuit open (no lamp connected, spotlight
defective)*
Fuse triggered
Phase error
The symbol is also displayed if a lamp is not
connected and output exceeds 90%.
*) The display ”-” (Circuit open) is not available on units fitted with an
electronic base load.
Input fields for all channels together
CLR
Yes [Save] resets all the parameters on this page to their
factory settings (see page 58).
You can assign all channels the same:
ALL PRE
ALL LIM
ALL DCU
− Preheat values
− Output level limits
− Dimmer curves
The value ranges are as for PRE, LIM and DCU (see
previous page).
THRESHLD Switching threshold for a non-dim curve
Value range:
Factory setting:
5 to 95
10