Det-Tronics EQP Fire and Gas Detection/Releasing System - Manual (Page 80)

14.1 95-8533 4-3
Next and Previous buttons are used to scroll the lists.
The Enter button is used to navigate to the next level.
The Cancel button is used to back out a level.
Alarm Types
Fire
Supervisory
Trouble
Low Gas
High Gas
Inhibit
Output Inhibit
Alarm Type Off/On
Tag Name
Alarm Description
Time and Date ack
Visible if the
alarm was
acknowledged
Display Alarms Screen
Current
Input State
Pressing the ack
switch acknowledges
the visible alarm.
Display Alarms
Enter / Cancel
Auto Scrolling Alarm
Screen
Marque Display
Display Current Time/Date
(no active alarms)
Serial Ports*
Configuration Port
Serial Port 1
Serial Port 2
Serial Port 3
Serial Port 4
Redundancy Port
Diagnostics
Redundancy Info
Fault:
Lst Flt:
Cntr Mode:
My Config:
Redun Mem:
HSSL Status:
Version Match:
Parser:
Comm Ack:
Lon Comm:
Msg Error:
--Master Errors--
Program Flow:
LON A Inf:
LON B Inf:
User Logic CS:
App CS:
User Logic:
Config:
--Standby Errors--
Program Flow:
LON A Inf:
LON B Inf:
User Logic CS:
App CS:
User Logic:
Config:
Power 1:
Power 2:
Option Bd:
Main Menu
Display Alarms
Display Devices
Device Tagnames
Set Time & Date
Serial Ports
Diagnostics
Redundancy Info
Device Tagname
Add: xxx Device Type
Fault/ No Fault
Device dependent info
Display Devices*
Device Tagnames*
Tag Name for Device n
Tag Name for Device n
Tag Name for Device n
Set Time and Date
Edit Time/Date
Previous Next
Enter
Next
Prev
Cancel
Reset
Enter
Next
Prev
Alarm
Enter
Cancel
* Submenus with more detailed information are available.
Lamp Test – Enter
Figure 4-3—EQP Controller Message Display Menu Outline