Det-Tronics UD10 FlexVu Universal Display SAFETY MANUAL - Manual

SAFETY MANUAL
FlexVu ® Universal Display
Model UD10
2.1 © Detector Electronics Corporation 2013 Rev: 3/13 95-8668
SAFETY CERTIFIED MODEL UD10
UNIvERSAL DISpLAY
This manual addresses the specific requirements and
recommendations applicable to the proper installation,
operation, and maintenance of all Safety-Certified
(SIL-Certified) FlexVu ® Model UD10 Universal Display
product versions. For complete information regarding
system overview, performance, installation, operation,
maintenance and specifications of the Model UD10,
refer to instruction manual 95-8661.
QUALITY pOLICY STATEMENT
All quality assurance control measures necessary for
safety management as specified in IEC 61508 Part 1
have been implemented. The quality management
system of Det-Tronics is based on the requirements
of EN ISO 9001 and ANSI/ASQC Q9001 through the
application of the United Technologies Company
Achieving Competitive Excellence (ACE) program. In
addition, the Quality Management System complies
with the European ATEX Directive requirements per EN
13980, the International Electrotechnical Commission
requirements per OD005/V2, and the supervised
testing requirements per ISO 17025.
SAFETY MESSAGES
Procedures and instructions in this section may
require special precautions to ensure the safety of
personnel performing the operations. Information that
raises potential safety issues is indicated by the word
“Warning”. Always read and understand these safety
messages.
WARNING
The Model UD10 Universal Display is intended
for use in hazardous environments that may
include explosive levels of flammable gases and
vapors. This product must be properly installed,
operated and maintained. Improper installation
or use could result in an explosion or fire resulting
in death or serious injury.
• Do not remove the cover in explosive
environments when device power is on and
circuits are live.
• Device must be properly installed, and cover
must be fully engaged to meet hazardous area
explosion-proof/non-incendive requirements.