Det-Tronics STB Series Sensor Termination Box and Separation Kit - Manual

INSTRUCTIONS
Sensor Termination Box
and Separation Kit
Model STB Series
3.1 © Detector Electronics Corporation 2012 Rev. 11/12 95-8655
ApplicAtion
The Model STB Series Termination Box and Separation
Kit is intended for use in hazardous locations. It is
recommended for ease of sensor wiring and also allows
the sensor to be mounted remotely from the associated
transmitter/control device. The STB is available in
aluminum or stainless steel and contains the required
connectors for proper field wiring. Models are available
to accommodate CGS combustible gas sensors,
C706X electrochemical sensors, NTMOS, GT3000 gas
sensors, as well as Eagle Quantum Premier ® devices.
SpecificAtionS
TERMINALS—
Rated for 14-22 AWG or 2.5-0.33 mm 2 wire.
ELEcTRIcAL RATINg—
Input Voltage: 18 to 36 Vdc.
Input Power: 0.5 watt maximum.
Output Power: 20 watts maximum load.
TEMpERATuRE RANgE (See certifications)—
Operating: –40°F to +167°F (–40°C to +75°C).
Storage: –67°F to +185°F (–55°C to +85°C).
HuMIdITy RANgE—
0 to 99% RH, non-condensing.
THREAd opTIoNS—
3/4 inch NPT, M25 or M20.