Det-Tronics ATX10 Transmitter SAFETY MANUAL User Manual
Safety manual flexsonic
SAFETY MANUAL
FlexSonic
™
Acoustic Detector
AC100 Sensor
ATX10 Transmitter
1.2
©
Detector Electronics Corporation 2013
Rev: 6/13
95-8658
SAFETY CERTIFIED FLExSoNIC ACoUSTIC
DETECToR
This manual addresses the specific requirements
and recommendations applicable to the proper
installation, operation, and maintenance of all Safety-
Certified (SIL-Certified) FlexSonic
™
Acoustic Detector
product versions. For complete information regarding
system overview, performance, installation, operation,
maintenance and specifications of the FlexSonic
Acoustic Detector, refer to instruction manual 95-8657.
QUALITY PoLICY STATEMENT
All quality assurance control measures necessary for
safety management as specified in IEC 61508 Part 1
have been implemented. The quality management
system of Det-Tronics is based on the requirements
of EN ISO 9001 and ANSI/ASQC Q9001 through the
application of the United Technologies Company
Achieving Competitive Excellence (ACE) program. In
addition, the Quality Management System complies
with the European ATEX Directive, EN ISO/IEC 80079-
34, and supervised testing requirements per ISO 17025.
SAFETY MESSAGES
Procedures and instructions in this section may
require special precautions to ensure the safety of
personnel performing the operations. Information that
raises potential safety issues is indicated by the word
“Warning”. Always read and understand these safety
messages.
WARNING
The FlexSonic Acoustic Detector is intended for
use in hazardous environments that may include
explosive levels of flammable gases and vapors.
This product must be properly installed, operated
and maintained. Improper installation or use
could result in an explosion or fire resulting in
death or serious injury.
• Do not remove the cover of a junction box in
explosive environments when device power is
on and circuits are live.
• Device must be properly installed to meet
hazardous area explosion-proof/non-incendive
and intrinsic safety requirements.
AC100 Sensor
ATX10 Transmitter