Apple Compressor 3 - Manual (Page 191)

5 Select the DVD button.
This sets the resolution of the output to match the selected frame rate.
6 Choose the bit rate to use with the Bit Rate slider, or enter a value directly.
The typical value used for DVD projects is 1.15 Mbps, with 1.856 Mbps being the maximum
allowed.
Stage 3: Making an Elementary Video Stream
In order for the output media file to be an elementary video stream, you must turn off
the audio setting.
To turn off the audio for the video setting
1 Click the Audio button in the MPEG-1 Encoder pane to open the Audio tab.
2 Deselect the Enabled checkbox.
This ensures that this setting (preset) will only create an elementary video stream and
sets the file extension to .m1v.
Deselect to disable
the Audio tab.
3 Click the Save button (in the lower-right corner of the Inspector) to save this setting.
This saves the “MPEG-1 Video for DVD” setting.
Creating the MPEG-1 Audio for DVD Setting
The following sections create the setting for an MPEG-1 elementary audio output file
suitable for DVD.
• Stage 1: Creating the MPEG-1 Audio for DVD Setting
• Stage 2: Making an Elementary Audio Stream
• Stage 3: Configuring the Audio Settings
Stage 1: Creating the MPEG-1 Audio for DVD Setting
This section describes creating MPEG-1 audio settings for DVD use.
191 Chapter 17 Creating MPEG-1 Output Files