Brother PR-600 - Manual (Page 99)

OTHER BASIC PROCEDURES ——————————————————————————————————————————————————
80
■ To select the stitch from where embroidering is
to begin
3
Touch and to select a color in
the thread color sequence, and then touch
, , , , and
to select the stitch.
1 Touch this key once to return to the beginning of
the stitching for the color being sewn. Afterward,
each touch of this key returns to the beginning of
sewing for the previous thread color.
2 Each touch of this key advances to the beginning
of sewing the next thread color.
3 Each touch of this key moves one stitch back
through the stitching.
4 Each touch of this key moves ten stitches back
through the stitching.
5 Each touch of this key moves one hundred
stitches back through the stitching.
6 Each touch of this key moves one stitch forward
through the stitching.
7 Each touch of this key moves ten stitches forward
through the stitching.
8 Each touch of this key moves one hundred
stitches forward through the stitching.
9 The thread color at the top of the thread color
sequence display is the color of the area currently
selected.
0 Touch this key to close this screen.
X The needle bar case moves and the current
needle bar moves to the sewing position,
and then the embroidery frame moves and
current needle position is indicated.
4
After selecting the stitch from where
embroidering is to begin, touch .
X The embroidering screen appears again.
5
Touch , and then press the start/stop
button to begin embroidering.
X Embroidering begins from the specified
point.
Sapphire.book Page 80 Friday, August 1, 2003 9:12 AM