beautypg.com

Patterns, Embroidering – Brother PR-600 User Manual

Page 77

background image

EMBROIDERING TUTORIAL ———————————————————————————————————————————————————

58

PATTERNS:

Following patterns can be used to embroider by the
machine.
- Embroidery data with *.pes, *.phc or *.dst format.

Either CompactFlash card or floppy disk transfers
the data to the machine. Also via USB cable, the
data can be transferred from the PC to the
machine.

- Optional embroidery cards
- Embroidery patterns created by PE-Design
- The patterns saved on the floppy disk by the

machine

EMBROIDERING:

Want to set the own embroidery colors instead

of the preset colors
- Use the “Change thread color” function by

selecting the key on either the “pattern editing”
or the “embroidery setting” screen. More
details please see the page 128.

- Use the “Temporary needle bar setting”

function by selecting the key on the
“embroidering” screen. More details please see
the page 92.

Want to stop embroidering in the middle of

pattern and turn off the power. Then want to
resume the embroidery later
- The machine remembers the pattern and the

position even after turning off the power. And
the machine can resume the embroidery when
the machine turns on again. (Refer to page 60)

Getting false thread breakage error

- Check that the position of upper thread is in

pretension plates. (Refer to page 36)

- Check that the position of upper thread is

around the tension disk pulley. (Refer to
page 37)

1 Pretension plates
2 Tension disk pulley

Thread tension changed suddenly

- Thread is caught on a rough edge of the spool

of upper thread.

- Upper thread is caught under the spool of

thread.

- The thread dust or lint is not gathered under

the bobbin's tension spring.

The frame came out from the carriage

Make sure that the positioning pins are placed
into the frame's positioning slot and hole. (Refer
to page 31)
It is a good idea to turn off the machine once to
originate the carriage before you re-sew the
pattern.

Want to reset the sewing and start from the

scratch
Select the “New Embroidery” key on the upper
left of the screen. The pattern and all information
will be deleted. (Refer to page 48)

Sapphire.book Page 58 Friday, August 1, 2003 9:12 AM

This manual is related to the following products: