Brother PR-600 - Manual (Page 57)

EMBROIDERING TUTORIAL ———————————————————————————————————————————————————
38
6
Pass the thread along the thread path
indicated on the machine, and then pass it
through the number 1 middle thread guide.
1 Middle thread guide
2 Thread guide pin
• The path from the upper thread guide
around the thread tension disc and to the
middle thread guide (steps
5
through
6
)
differ depending on the spool number.
Passing the thread from the left to the right
through the thread guide pin is designed to
prevent the thread from becoming tangled.
Thread each needle bar as shown in the
illustration.
7
Pass the thread along the number 1 slot to
pass it through the number 1 take-up lever
hole from the right.
1 Thread take-up lever
8
Pass the thread through the slot in the thread
guide, and then through the hole in the
number 1 lower thread guide.
1 Hole in lower thread guide
9
Use the included threader to pass the thread
through the number 1 needle bar thread
guide.
1 Needle bar thread guide
2 Needle changing tool (Threader)
1
2
1
1
Sapphire.book Page 38 Friday, August 1, 2003 9:12 AM