Brother PR-600 - Manual (Page 61)

EMBROIDERING TUTORIAL ———————————————————————————————————————————————————
42
X The following screen appears.
1 The red frame around the thread information
indicates that needle bar is currently being used
for sewing.
• While the embroidery machine is sewing,
the point being sewn is indicated by the
green crosshairs in the pattern display area.
In addition, the number of stitches and the
time count up.
3
After sewing of the first color is finished, the
machine automatically stops and trims the
thread. The needle bar case moves to the 2nd
color position and sewing of the second color
begins.
X The thread color display in the screen
continues to the second color, and the
thread information for the second needle
bar is surrounded by the red frame.
4
This continues until the last color is sewn, and
the embroidery machine automatically stops.
X The embroidering settings screen reappears.
X The start/stop button lights up in red.
• No thread trimming operations at the
beginning of stitching and at the end of
stitching are necessary.
■ Continuing embroidering
To sew the same pattern again, touch .
X The embroidering screen appears so the
same pattern can be sewn again.
To select a new pattern, touch or .
X The pattern type selection screen appears.
Note
● Automatic Lock stitching can be set so that
it is sewn at the beginning of the
embroidery, when starting to sew after
change thread colors, and when trimming
the thread. (Refer to “Automatic Lock Stitch
Setting” on page 86.)
● The sewing speed can be changed, even
while the pattern is being sewn. (Refer to
“Maximum Sewing Speed Setting” on
page 89.)
Sapphire.book Page 42 Friday, August 1, 2003 9:12 AM