Brother PR-600 - Manual (Page 88)

Embroidery Frame Position and Movement 69
3
• The embroidery frame is replaced while the
embroidering settings screen or embroidering
screen is displayed, and then the key for
checking the embroidering area, for moving
the embroidery frame, or for starting
embroidering is touched.
The embroidery frame will move.
Since the embroidery frame is moved to the
correct position and paused, touch the desired
key again.
If the pattern extends out of the embroidering
area for the frame after the frame is moved, a
message appears, indicating that the
embroidery frame should be replaced. Either
replace the embroidery frame or return to the
pattern editing screen and adjust the pattern
size or embroidering position.
Sapphire.book Page 69 Friday, August 1, 2003 9:12 AM