Brother PR-600 - Manual (Page 22)

Names of Machine Parts and Their Functions 3
1
Right-side/rear view
■ Models with a built-in floppy disk drive
1 Floppy disk slot
Insert the floppy disks (commercially available) into the
floppy disk drive slot.
■ Models without a built-in floppy disk drive
2 Floppy disk drive mounting location
Attach the optional floppy disk drive at this location.
3 Floppy disk drive connector
4 Embroidery card slot
Insert the embroidery cards (sold separately) into the
embroidery card slot.
5 CompactFlash card slot
Insert the CompactFlash cards (commercially available)
into the CompactFlash card slot.
6 Handwheel
Rotate the handwheel to move the needle up and down.
Be sure to rotate the handwheel counterclockwise.
7 USB port connector
When sending patterns from a computer to the
machine, plug the USB cable from the computer into
the USB port connector.
8 Power supply plug
Insert the plug on the power supply cord into the power
supply plug.
9 Main power switch
Use the main power switch to turn the machine ON (I)
and OFF (
{
).
0 Ventilation slots
Operation panel
1 Start/stop button
Press the start/stop button to start or stop machine. The
lighting status and color of the button changes
depending on the operation condition of the machine.
Lit in red :When the machine cannot start sewing
Flashing in green:When the machine can start
sewing
Lit in green :While the machine is sewing
Off :When the machine is turned off
2 Thread trimming button
Press the thread trimming button to trim both the upper
and the bobbin threads.
3 Automatic needle-threading button
Press the automatic needle threading button to thread
the needle.
4 LCD (touch panel)
Touch the keys that appear on the touch panel to select
and edit patterns and confirm various information.
■ Models with a built-in floppy disk drive
■ Models without a built-in floppy disk drive
0
4
5
9
8
6
7
Bottom
4 1 2 3
Sapphire.book Page 3 Friday, August 1, 2003 9:12 AM