Brother PR-600 - Manual (Page 33)

EMBROIDERING TUTORIAL ———————————————————————————————————————————————————
14
Operating Precautions
The necessary points to ensure the correct operation of this machine are described below.
Power supply precautions
Be sure to observe the following precautions concerning the power supply.
● Use only regular household electricity for the power source. Using other power sources may
result in fire, electric shock, or damage to the machine.
● If any of the following occur, turn off the embroidery machine and unplug the power supply
cord, otherwise a fire, an electric shock or damage to the machine may result.
• When you are away from the machine.
• After using the machine.
• If a power outage occurs while the machine is being operated.
• If the machine is not operating properly, for example, when there is a loose or cut connec-
tion.
• During electrical storms.
● Do not plug this machine in with extension cords or multi-plug adapters with many other
appliances plugged into them, otherwise a fire or an electric shock may result.
● Do not plug in or unplug the power supply cord with wet hands, otherwise an electric shock
may result.
● When unplugging the power supply cord, be sure to first turn off the machine, and then grasp
the plug when unplugging the cord. Pulling on the cord may damage it or result in a fire or an
electric shock.
● Do not allow the power cord to be cut, damaged, modified, forcefully bent, pulled, twisted,
or bundled. In addition, do not place heavy objects on the cord or expose it to heat, otherwise
damage to the cord, fire or an electric shock may result. If the power supply cord or its plug is
damaged, stop using the machine, and then take the machine to your nearest authorized
dealer for repairs before continuing use.
● If the machine is not to be used for a long period of time, unplug the power supply cord,
otherwise a fire may result.
WARNING
CAUTION
Sapphire.book Page 14 Friday, August 1, 2003 9:12 AM