Brother PR-600 - Manual (Page 9)

viii
Care of CompactFlash cards
• Use only 32 MB, 64 MB or 128 MB CompactFlash cards.
• Do not disassemble or alter CompactFlash cards.
• Do not bend, drop, scratch or place heavy objects on top of the CompactFlash cards.
• Do not allow the CompactFlash cards to become wet, such as with water, solvents, drinks or any
other liquids.
• Do not use or store the CompactFlash cards in a location exposed to strong static electricity or
electrical interference.
• Do not use or store CompactFlash cards in locations exposed to vibrations or impacts, direct
sunlight, extreme dust (or lint), high temperatures, high humidity, severe temperature
fluctuations, or strong magnetic forces (such as from speakers).
• While embroidery data is being stored or recalled from the CompactFlash card, do not allow the
machine to be exposed to vibrations or impacts, and do not attempt to remove the Compact
Flash card from the machine.
• Data on the CompactFlash cards may be lost or damaged due to some malfunction or accident.
We recommend backing up important data.
• Only insert or remove CompactFlash cards while appears in the display, or when
prompted to change cards by a message on the display (see page 114).
• The CompactFlash card was formatted during manufacturing of this machine. We recommend
that the card not be reformatted.
For additional information, refer to the instruction manual included with the CompactFlash card that
you have purchased.
Care of floppy disks
To use floppy disks with models not equipped with a built-in floppy disk drive, purchase the floppy
disk drive separately.
•
Only use 2HD Windows-formatted floppy disks.
• Do not disassemble the floppy disks. In addition, do not open the shutter on the floppy disk and
directly touch the disk.
• Do not forcefully bend, drop, scratch or place heavy objects on top of the floppy disks.
• Do not allow the floppy disks to become wet, such as with water, solvents, drinks or any other
liquids.
• Do not place floppy disks near magnetic objects, such as disk drives.
• Do not use or store floppy disks in locations exposed to vibrations or impacts, direct sunlight,
extreme dust (or lint), high temperatures, high humidity, severe temperature fluctuations, or
magnetic forces (such as near televisions or magnets).
• While embroidery data is being stored or recalled from the floppy disk, do not allow the machine
to be exposed to vibrations or impacts, and do not attempt to remove the floppy disk from the
machine.
• Data on the floppy disks may be lost or damaged due to some malfunction or accident. We
recommend backing up important data.
• Store floppy disks in a dustproof, protective case.
• If the magnetic head is dirty, data on floppy disks may not be read correctly. We recommend
using a commercially available cleaning disk to periodically clean the magnetic head (see
page 188).
• When storing embroidery patterns on floppy disks, the floppy disks must not be write-protected.
• Only insert or remove floppy disks while appears in the display, or when prompted to
change disks by a message on the display (see page 116).
*CompactFlash TM is a registered trademark of SanDisk Corporation in the United States and licensed
to the CompactFlash TM Association (CFA).
*All other company and product names mentioned with this product or in this Operation Manual are
trademarks or registered trademarks of their respective companies. However, the explanations for
markings such as
® and TM are not clearly described within the text.
Sapphire.book Page viii Friday, August 1, 2003 9:12 AM