Brother PR-600 - Manual (Page 118)

Selecting an Embroidery Pattern 99
5
Selecting an Embroidery Pattern
Various embroidery patterns are built into this machine. Other than the built-in patterns, various other patterns
can be selected from embroidery cards (sold separately), CompactFlash cards (through electronic retail store)
and from the computer.
General pattern selection
The procedure for selecting a pattern differs depending on the type of pattern; however, the general procedure
for selecting a pattern is described below.
1
In the pattern type selection screen, touch the key for the desired category.
Pattern type selection screen
1 Embroidery patterns
2 Frame patterns
3 Alphabet patterns
4 Renaissance alphabet patterns
5 Floral alphabet patterns
6 Appliqué alphabet patterns
7 Embroidery patterns stored in the machine 8 CompactFlash cards
9 Floppy disks
(On models without a built-in floppy disk drive,
this appears only when the optional floppy disk
drive is installed)
0 Computer (USB)
A Embroidery cards
2
In the pattern list screen, which appears next, touch the desired pattern to select it.
Pattern list screen
1 Pattern keys
• Touch a pattern to display the following
information of the pattern.
5Vertical length of the pattern
6Horizontal width of the pattern
7Number of thread color changes
• If there is more than one page, touch
2 and 3 until the desired page is
displayed.
• To change the category, touch 4 to
return to the pattern type selection screen.
• After selecting the pattern, touch 8.
The selection of the pattern is confirmed and
the pattern editing screen appears.
Sapphire.book Page 99 Friday, August 1, 2003 9:12 AM