Brother PR-600 - Manual (Page 131)

Selecting/Editing/Saving Patterns —————————————————————————————————————————————————
112
2
Touch .
X The list of patterns is displayed.
3
Select an embroidery pattern.
Touch the desired pattern.
X The selected pattern appears in the pattern
display area.
• If the wrong pattern was selected or you
wish to select a different pattern, touch the
desired pattern.
• To add a pattern from the computer, repeat
steps
1
.
X The following screen appears while data is
written to the embroidery machine, and the
key for that pattern appears when writing is
finished.
4
Touch .
This confirms the pattern selection.
X The pattern editing screen appears.
Note
● The pattern recalled from the computer is
only temporarily written to the machine. It
is erased from the machine when the
machine is turned off. If you wish to keep
the pattern, store it in the machine. (Refer to
“Saving Embroidery Patterns” on page 135.)
Sapphire.book Page 112 Friday, August 1, 2003 9:12 AM