Brother PR-600 - Manual (Page 219)

Appendix ———————————————————————————————————————————————————————————
200
Patterns cannot be deleted
from the CompactFlash card.
The CompactFlash card may be
damaged.
During data transfer, the USB
cable was disconnected.
Do not disconnect the USB
cable while data is being trans-
ferred. (Refer to page 111.)
Patterns stored in the
machine's memory cannot be
recalled.
The machine's memory may be
damaged. Consult your nearest
authorized dealer.
Patterns on the embroidery
card cannot be read.
The embroidery card may be
damaged.
A pattern on an embroidery
card not compatible with this
machine was being recalled.
Some embroidery cards with
copyrighted patterns cannot be
used.
was touched while no
embroidery card is inserted.
Insert an embroidery card.
(Refer to page 109.)
The pattern has too many
stitches and cannot be used.
Data with stitches that exceed
specifications (500,000 stitches)
cannot be displayed. Use data
design software to reduce the
number of stitches.
The pattern is too large.
Patterns larger than 200 mm (H)
× 300 mm (W) (7-7/8 inches (H)
× 11-3/4 inches (W)) cannot be
used. Reduce the pattern to a
size smaller than that specified.
More than 101 patterns are
being combined.
Reduce the number of patterns
combined. Up to 101 patterns
can be combined.
More than 501 thread color
changes are being specified in
the pattern.
Up to 501 thread color changes
can be specified in a pattern.
There are too many characters
to be arranged on the curve.
Reduce the number of charac-
ters.
The pattern is larger than the
embroidering area of the
installed embroidery frame.
Use an embroidery frame with
an embroidering area that is
larger than the pattern.
Sapphire.book Page 200 Friday, August 1, 2003 9:12 AM