Brother PR-600 - Manual (Page 52)

Upper Threading 33
2
10. Upper Threading
Check the embroidering screen for information on which needle bars should be threaded with which thread
colors, and then thread the upper threads.
Checking the needle bars and thread colors
In the embroidering settings screen, touch to display the embroidering screen and the message
instructing that the needle bars be threaded (that the thread spools from the previous time be changed). Check
the thread colors in this screen.
Embroidering screen (For details on the keys and other information on the screen, refer to page 55.)
1 Thread information for the first needle bar
2 Thread information for the second needle bar
3 Thread information for the third needle bar
4 Thread information for the fourth needle bar
5 Thread information for the fifth needle bar
6 Thread information for the sixth needle bar
7 If no thread color name is displayed, that needle
bar is not being used.
8 Change thread spools message (Refer to page 75.)
This message appears when it is necessary for the
thread spools to be changed. If 9 is not
touched to close the message, embroidering
cannot continue.
Thread with the color name that appears beside each
needle bar number is threaded on that needle bar.
For the screen shown
1: Lime green
2: Moss green
3: Orange
4: Red
5: Yellow
If there is no name beside the needle bar number,
that needle bar is not used. For this example, needle
bar 6 is not used.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Thread color
name Needle bar
number Thread
color
Sapphire.book Page 33 Friday, August 1, 2003 9:12 AM