Brother PR-600 - Manual (Page 181)

Appendix ———————————————————————————————————————————————————————————
162
3
With a fabric marker, mark this point on the
fabric.
4
Set the beginning of stitching in the lower-
right corner.
X The frame moves so that the needle drop
point aligns with the beginning of stitching.
5
With a fabric marker, mark this point on the
fabric.
6
Remove the embroidery frame from the
machine, and then connect these two points
to check the embroidering position.
• If the baseline is misaligned or intersects
another line, reframe the fabric in the
embroidery frame or adjust the position of
the pattern.
Sapphire.book Page 162 Friday, August 1, 2003 9:12 AM