Brother PR-600 - Manual (Page 93)

OTHER BASIC PROCEDURES ——————————————————————————————————————————————————
74
■ Spool change indicator ( )
The spool change indicator in the stitch
navigating screen indicates the number of times
that the thread spools will need to be changed
and the amount of time between changes.
1
Touch in the embroidering screen.
X The stitch navigating screen appears.
2
Touch .
X Each time this key is touched, the next color
in the thread color sequence display is
selected. After reaching the last color in the
thread color sequence display, the scrolling
stops.
3
Check the position of .
1 indicates when the thread spools will
need to be changed. The thread spools will need
to be changed the number of times that this
indicator is displayed and between the two
thread colors at the point where it is displayed.
2 Touch to scroll up through thread color
sequence display. Each time this key is touched,
the previous color in the thread color sequence
display is selected. After reaching the first color in
the thread color sequence display, the scrolling
stops.
4
After checking the desired information, touch
or to return to the first color.
And then touch .
X The embroidering screen appears again.
Sapphire.book Page 74 Friday, August 1, 2003 9:12 AM