Automatic lock stitch setting – Brother PR-600 User Manual
Page 105
Embroidering Settings ——————————————————————————————————————————————————————
86
Automatic Lock Stitch Setting
The machine can be set to automatically sew lock stitches, for example at the beginning of the pattern, before
sewing each thread color change, and before trimming the thread.
When the embroidery machine is purchased, this
function is set to “on”.
■ Specifying that lock stitches be sewn at the
beginning of the pattern, at the beginning of
sewing each thread color change and at the
beginning of sewing after the thread trim.
1
Touch
so that it changes to
.
Touch
(or
) to select the desired
setting.
• Each touch of the key turns the setting either
on or off.
Memo
● If the first stitch length is less than 0.8 mm,
the lock stitch won't be inserted.
■ Specifying that lock stitches be sewn before the
thread is trimmed.
1
Touch
so that it changes to
.
Touch
(or
) to select the desired
setting.
• Each touch of the key turns the setting either
on or off.
Memo
● The automatic lock stitch setting stays the
same until the key is touched to turn it off.
The setting specified before the machine is
turned off remains selected the next time
that the machine is turned on.
Automatic lock stitch
setting turned on
Automatic lock stitch
setting turned off
Automatic lock stitch
setting turned on
Automatic lock stitch
setting turned off
Sapphire.book Page 86 Friday, August 1, 2003 9:12 AM