Brother PR-600 - Manual (Page 206)

Maintenance 187
7
3
Rotate the handwheel (about 50 degrees) to
move the race of the hook to a position where
it can easily be oiled.
1 Handwheel
• Be sure to rotate the handwheel
counterclockwise.
4
Add 1 drop of oil into the hook race.
1 Apply oil here.
5
After oiling, insert the bobbin case into the
hook, and then close the hook cover. (Refer to
page 18.)
Note
● Apply 1 drop of oil into the hook race every
day.
● Apply only sewing machine oil. Use of any
other type of oil may result in damage to the
embroidery machine.
● Do not apply too much oil. Fabric or thread
may get contaminated. If too much oil is
applied, wipe off any excess with a rag.
● If the thread breaks while sewing or the
operating noise of the hook becomes loud,
apply oil onto the race hook.
1
1
Sapphire.book Page 187 Friday, August 1, 2003 9:12 AM