Brother PR-600 - Manual (Page 8)

vii
Precautions
Concerning optional embroidery cards
• Do not disassemble or alter the embroidery cards.
• Do not forcefully bend, drop, scratch or place heavy objects on top of the embroidery cards.
• Do not allow the embroidery cards to become wet, such as with water, solvents, drinks or any
other liquids.
• Do not use or store the embroidery cards in a location exposed to strong static electricity or
electrical interference.
• Do not use or store embroidery cards in locations exposed to vibrations or impacts, direct
sunlight, extreme dust (or lint), high temperatures, high humidity, severe temperature
fluctuations, or strong magnetic forces (such as from speakers).
• While embroidery data is being recalled from the embroidery card, do not allow the machine to
be exposed to vibrations or impacts, and do not attempt to remove the embroidery card from the
machine.
• Store embroidery cards in their protective cases.
• If an embroidery card other than our original embroidery cards are used, the embroidery
machine may not operate correctly. Be sure to use only recommended embroidery cards.
• Some licenced embroidery cards cannot be used with this embroidery machine.
• Embroidery cards sold overseas cannot be used with this embroidery machine.
• Only insert or remove embroidery cards while appears in the display or while the
embroidery machine is turned off (see page 109.)
Sapphire.book Page vii Friday, August 1, 2003 9:12 AM