Brother PR-600 - Manual (Page 55)

EMBROIDERING TUTORIAL ———————————————————————————————————————————————————
36
1
Place on spool pin 1 the spool of thread with
the color (lime green) specified for needle bar
1.
• Make sure that the spool stand is opened in
the shape of a V.
• When using small spools of thread, be sure
to place the enclosed spool mat on the spool
pin before placing the spool on the pin.
1 Spool mat
2 Small spool
2
Pass the thread through the number 1 hole in
the thread guide just above the spool, and
then pass the thread through the number 1
hole in the thread guide toward the front of
the machine.
1 Number 1 hole in the thread guide above the
spool
2 Number 1 hole in the thread guide toward the
front of the machine
1
1
2
2
3
3
4
4
5
5
6
6
1
2
3 4
5
6
1
2
3 4
5
6
1 2 5 6
The numbers indicate the thread path for each of the numbered needle bars. Be very careful to
correctly thread the needle bars.
2
1
Sapphire.book Page 36 Friday, August 1, 2003 9:12 AM