Paper type mismatch, Unregistered forms, Print user id – Xerox 4112-4127 Enterprise Printing System-4611 User Manual
Page 90: Banner sheet, Banner sheet offset
Setups
3-74
Xerox 4112/4127 EPS
System Administration Guide
Paper Type Mismatch
Set the action to be taken when the paper type loaded in the paper tray does not match that
specified.
•
Print: Carry on printing, even if the paper type is different.
•
Display Confirmation Screen: Show a confirmation screen, and prompt for action.
•
Display Paper Supply Screen: This selection shows the Paper Supply screen when a paper
type mismatch occurs.
Unregistered Forms
When a form in a form data file (overlay printing) is specified for printing but not present on the
host computer, select whether or not to print the job. If you select Print and the specified form
is not present, only the data is printed.
This setting is added to the Print Settings menu when there is a print specification from the host
computer.
Print User ID
When printing by a print driver, select whether or not to print the user authentication
information to the paper for the purpose of distinguishing the identity of the user. A maximum
of 64 characters can be printed in the user ID information.
Select from one of the following: Off, Top Left, Top Right, Bottom Left, and Bottom Right.
Note
To use the ID Print feature, the User ID, set by the printer driver, is necessary
beforehand. For the configuration procedure, refer to the online help for the printer driver.
If the user ID information cannot be acquired, the words “Unknown User” are printed.
Banner Sheet
Select whether or not the banner sheets will be used to separate different output jobs. Select
one of the following:
•
Off: Do not print banner sheets.
•
Start Sheet: Print a banner sheet before a print job.
•
End Sheet: Print a banner sheet after a print job.
•
Start Sheet & End sheet: Print a banner sheet both before and after a print job.
Note
Even if the stapler feature is enabled, banner sheets are not stapled.
On a print job from a Macintosh, the document name does not appear on the banner sheet.
When printing banner sheets, they are counted for metering purposes.
Banner Sheet Offset
Select whether or not to offset the banner sheet from the rest of the printed set. Select Offset
or No Offset.