Xerox 4112-4127 Enterprise Printing System-4611 - Manual (Page 35)

Setups
Xerox 4112/4127 EPS 3-19
System Administration Guide
3. Select Paper Size or Paper Type.
Paper Size
Standard-sized paper that is loaded into trays 3, 4, 6, and 7 is automatically detected. However,
when a nonstandard size is loaded, it is necessary to specify the width and height.
Tip
Depending on the paper size, the guide lever may not fit, and this may cause paper jams or
other errors. Tray detection may also not be possible. In such cases, use tray 5 (Bypass
Tray).
Note
Trays 1 and 2 are preset at manufacturing at size 8.5 x 11 in. (A4); therefore, the paper size
for these two trays cannot be changed on this screen.
Paper Type
The Paper Type feature is discussed on the following pages.
1. When selecting Paper Size, select Auto Size Detect or Variable Size.
Tip
Remember, you cannot select or set the paper size for trays 1 and 2.
When Variable Size is selected, enter the paper size using , , W, and X.