Initialize hard disk, Initialize hard disk -27 – Xerox 4112-4127 Enterprise Printing System-4611 User Manual
Page 43
Setups
Xerox 4112/4127 EPS
3-27
System Administration Guide
Initialize hard disk
This procedure initializes the hard disk. The data erased by formatting includes additional
fonts, ESC/P, HP-GL/2, and SMB folder.
Tip
The secure print document log is not erased.
1.
From the Maintenance screen, select Initialize Hard Disk.
2.
Select the partition to be reformatted and select Start.
3.
Select Yes.
4.
When reformatting completes successfully, the message screen appears, select Confirm.
5.
Select Close to return to the Maintenance screen.
6.
Select Close to return to the Common Settings screen.
This manual is related to the following products: