Xerox 4112-4127 Enterprise Printing System-4611 - Manual (Page 12)

Overview
1-6 Xerox 4112/4127 EPS
System Administration Guide
Low Power mode
(Power consumption: 225W)
In this mode, the power to the UI and fuser unit is lowered to save power. The display goes out,
and the Power Saver button on the Control Panel lights. To use the machine, press the Power
Saver button. The Power Saver button goes out to indicate that the Power Saver feature is
canceled.
Sleep mode
(Power consumption: 15W)
In this mode, the power is lowered to 15 watts and the fuser switches off. The display goes out,
and the Power Saver button on the Control Panel lights. To use the machine, press the Power
Saver button. The Power Saver button goes out to indicate that the Power Saver feature is
canceled.
Changing the Power Saver mode time interval
To activate the Power Saver feature, set the Sleep Mode button to Enabled, and set the Low
Power Mode and the Sleep Mode time intervals as follows:
Note
The amount of time that passes before the machine enters Low Power Mode and Sleep
Mode can be specified in 1 minute increments, from 1 to 240 minutes for each mode.
1. Enter the System Administrator Mode (page 1-4).
2. Select System Settings and then select Common Settings.