Xerox 4112-4127 Enterprise Printing System-4611 User Manual
Page 49
Setups
Xerox 4112/4127 EPS
3-33
System Administration Guide
Note
Two lines are printed on the image of side 1 and one line is printed on the image of side 2
of the sample that is printed with Sample Printout to indicate the paper feed direction.
13. Press Save.
14. Check the sample output, and adjust the position if misalignment has occurred.
Note
For details on making each adjustment, refer to the following sections .
15. After you finish making adjustments, print another output sample by pressing the Sample
Printout and verify the adjustment results.
16. Make adjustments again if necessary and press Save.
17. Press Save.
18. Press Close.
19. Select the tray to assign the set type (the tray in which you loaded the paper in Step 1), and
press Change Settings.