Auto print, Printer lockout duration, Auto print -10 – Xerox 4112-4127 Enterprise Printing System-4611 User Manual
Page 26: Printer lockout duration -10
Setups
3-10
Xerox 4112/4127 EPS
System Administration Guide
Auto print
Set the time from the end of the print job until the execution of the next print job. Set the value
from 1 to 240 seconds, in one second increments.
If you select Off, once the machine is ready, printing can start immediately.
1.
From the Machine Clock/Timers screen, select Auto Print, and select Change Settings.
2.
Select Off or On.
3.
If you selected On, set the wait-to-print time by using the
,
, or the numeric keypad to
enter a numeric quantity.
4.
Select Save to save the settings and return to the previous window.
Printer Lockout Duration
Set the time from the start to the end of printer lockout. Set the values from 0 to 23 hours and
to 59 minutes. If you select Off no printer lockout occurs.
1.
From the Machine Clock/Timers screen, select Printer Lockout Duration, and select
Change Settings.
2.
Select Off or On.
3.
If you selected On, set the time by using the
S
,
T
, or the numeric keypad to enter a
numeric quantity.
4.
Select Save to save the settings and return to the previous window.