Xerox 4112-4127 Enterprise Printing System-4611 - Manual (Page 78)

Setups
3-62 Xerox 4112/4127 EPS
System Administration Guide
Auto job promotion
This Other Settings option allows you to set the machine to automatically promote a job for
printing if the machine is unable to start a prior job. For example, the machine is unable to start
an operation because there is no paper in the tray (at the start of a print operation). If this
feature is enabled, then the machine can bypass the current job and allow other jobs to start.
Tip
The other jobs must not have the same print requirements as the faulted job. If other jobs
have different print requirements, then these other jobs can be promoted and printed.
Offset stacking (finisher tray)
Select the default offset stacking option for the finishing tray:
• None: If this option is selected, the finishing tray will not offset any output.
• Offset per set: If this option is selected, the finishing tray will offset each set of a print
job. This option also offsets each job.
• Offset per job: If this option is selected, all the sets of a job are delivered on one stack to
the output area
.
3 sets of another job
3 sets
of a
job 3 sets of a job
Job 1
Job 2
(with stacked sets)
(with stacked sets)