Xerox 4112-4127 Enterprise Printing System-4611 - Manual (Page 14)

Overview
1-8 Xerox 4112/4127 EPS
System Administration Guide
Note
The default for From Last Selection to Sleep Mode is 60 minutes. Configure the From
Last Selection to Sleep Mode time to be longer than the From Last Selection to Low
Power Mode time.
6. Press Save.
7. Select Close.
8. Exit the System Administrator Mode (page 1-5).
Exiting the Power Saver mode
The machine exits Power Saver mode when one of the following occurs:
• The user presses the Power Saver button on the Control Panel
• The machine is in the process of receiving print data
To exit the Power Saver mode at the machine:
1. Press the Power Saver button on the Control Panel.
Power Saver
button