Xerox 4112-4127 Enterprise Printing System-4611 - Manual (Page 80)

Setups
3-64 Xerox 4112/4127 EPS
System Administration Guide
Data Encryption
Tip
This is an optional feature that may not be available on your copier/printer; it is part of the
optional Data Security Kit. For more information, contact the Customer Support Center.
If you want the recorded data on the hard disk encrypted, select On as the default setting for
this feature. By switching on the data encryption, all data written to the hard disk is
automatically encrypted. Encryption prevents unauthorized access to the stored data. When
encryption is on, an encryption key must be set.
Perform the following steps:
1. Enter the System Administration mode (Chapter 1 Entering the System Administrator Mode
on page 1-4
).
2. Press the Machine Status button on the Control Panel.
3. Select the Tools tab.
4. Select Common Service Settings.
5. Select Other Settings.
6. Select Data Encryption.