Maintenance, Maintenance -26 – Xerox 4112-4127 Enterprise Printing System-4611 User Manual
Page 42
Setups
3-26
Xerox 4112/4127 EPS
System Administration Guide
The Reports screen is displayed.
Note
The reports actually listed on your Reports screen may vary according to the enablement or
disablement of related features or options.
2.
Select the item to be set or changed, and select Change Settings.
3.
For the Job History Report, you can select whether or not to automatically print a Job
History Report after a total of fifty jobs have been processed.
For the 2 Sided Report selection, when printing a report/list, select whether to print 1 sided
or 2 sided.
4.
Select Save to save your selection and return to the previous screen.
5.
Select Close to return to the Common Settings screen
Maintenance
The following features are available:
•
Initialize Hard Disk
•
Delete All Data
•
Software Options
•
Alignment Adjustment Settings
•
Finisher Adjustment (optional)
Tip
The Software Options feature is restricted to the Xerox Service Representative only. It is
not for customer use.
1.
From the Common Settings screen, select Maintenance.
2.
From the Maintenance screen, select the applicable option.
3.
Follow the instructions provided on the screen for carrying out a specific function.
4.
Select Close to return to the Maintenance screen.
5.
Select Close to return to the Common Settings screen.