Xerox 4112-4127 Enterprise Printing System-4611 - Manual (Page 76)

Setups
3-60 Xerox 4112/4127 EPS
System Administration Guide
4. Press Save.
5. Check the output sample, and measure the A and B fold position movement amounts.
6. Enter the measurement value you obtained in the previous step in Values A & B Before
Adjustment, and the final value you want after adjustment in Desired Values A & B.
Tip
Set value B so that an edge of the paper does not extend past a fold position of the paper.
An edge of paper extending past a fold position of the paper may cause a paper jam.
7. Press Sample Printout again to print an output sample, and check the adjustment results.
8. Make adjustments again if necessary. (Step 6)
9. Press Save.
A
B