System administrator mode, Entering the system administrator mode, System administrator mode -4 – Xerox 4112-4127 Enterprise Printing System-4611 User Manual
Page 10: Entering the system administrator mode -4
Overview
1-4
Xerox 4112/4127 EPS
System Administration Guide
Note
If you turn the power back on after turning it off, first make sure that the display on the UI
has gone out.
2.
Switch off the main power switch on the back of the machine.
3.
From the Controller window, select [System: Shutdown] to shut down the Controller.
4.
At the machine, switch the main power switch on the back of the machine to on.
5.
Open the power switch cover at the front of the machine and press the power switch to the
on [
|
] position. Make sure to wait until the machine is fully up before proceeding to the next
step.
6.
On the Controller, press the power on/off button and, once the Controller is up, log on as
System Administrator.
System Administrator Mode
Entering the System Administrator Mode
1.
Press the Log In / Out button.
2.
Enter the System Administrator ID with the numeric keypad, and select Enter.
Log In / Out
button