Xerox 4112-4127 Enterprise Printing System-4611 User Manual
Page 83
Setups
Xerox 4112/4127 EPS
3-67
System Administration Guide
1.
Select Encryption Key for Confidential Data.
2.
Select Keyboard and enter a 12-character encryption key.
Note
The default value for the encryption key is 111111111111 (twelve ones).
3.
Select Save (from the Keyboard screen).
You are returned to the Encryption Key for Confidential Data screen.
4.
Select Keyboard again.
5.
Enter the same encryption key once more.
6.
Select Save (from the Keyboard screen).
7.
Select Save (from the Encryption Key for Confidential Data screen).
8.
Exit the System Administration mode.
Data Restoration
Tip
The encrypted data cannot be restored if any of the following occur:
•
When there is a physical hard disk error
•
When you cannot remember the encryption key
•
When attempting to access the Service Representative Operation Limit feature, but
you cannot remember the System Administrator User ID and password.