Port settings, Protocol settings, Machine e-mail address/host name – Xerox 4112-4127 Enterprise Printing System-4611 User Manual
Page 86

Setups
3-70
Xerox 4112/4127 EPS
System Administration Guide
Port Settings
Select the interface by which the machine is connected to the client. In Port Settings, you can
set the following items:
Protocol Settings
Select the parameters that are required for communications between the machine and client
workstations. In Protocol Settings, you can set the following items:
Machine E-mail Address/Host Name
Select the e-mail address and host name for this machine. In Machine E-mail Address/Host
Name, you can set the following items:
1.
E-mail Address
2.
Machine Name
3.
Host Name
4.
Domain Name
LPD
Receive E-mail
NetWare
Send E-mail
SMB
E-mail Notification Service
IPP
UPnP Discovery
EtherTalk
WSD
Bonjour
Internet Services (HTTP)
Port9100
SOAP
SNMP
WebDAV
FTP Client
Ethernet Rated Speed
IPv6 Address Manual Configuration
TCP/IP - IP Mode
Manually Configured IPv6 Address
IPv4 - IP Address Resolution
Manually Configured IPv6 Address Prefix
IPv4 - IP Address
Manually Configured IPv6 Gateway
IPv4 - Subnet Mask
Automatically Configured IPv6 Address
IPv4 - Gateway Address
IPv6 - IP Filter
IPv4 - IP Filter