Xerox 4112-4127 Enterprise Printing System-4611 - Manual (Page 17)

Xerox 4112/4127 EPS 3-1
System Administration Guide
3
Setups
Tip
The User Interface (UI) screens shown in this guide may or may not reflect the screens
displayed on your system. The UI screens are a representation of the type of screens that
may
be seen on your particular system and vary from system to system and from
marketplace to marketplace. Also, some features displayed on the UI screens may not be
enabled for this product or are not applicable.
Overview
The machine has factory default (initial) settings which can be customized. This chapter
describes how to change these values for common system settings and print settings in the
System Administration mode.
System Settings
Note
To change any of the System Settings, it is necessary to be in System Administration
mode.
From System Settings, you can set or change the initial values. The system settings features
include:
Common Service Settings:
These settings relate to the machine itself such as machine clock, audio tones, and
maintenance/diagnostics. For more information, refer to “Common settings” in this chapter.
Print Service Settings:
You can set the amount of memory space for various buffers that receive data from the
controller, set the print time operation, and what the machine should do when it needs to
substitute a paper tray. For more information, refer to “Print mode settings” in this chapter.