Konica Minolta BIZHUB PRO 1050 - Manual (Page 63)

4
Installation (Network printing)
4-9 bizhub PRO 1050
Reminder!
Depending on your server and the state of your computer, steps differ as
follows.
If the printer driver for Windows NT4.0 is installed in the server and a dif-
ferent printer is installed in the computer:
Go to step 9.
If the printer driver for Windows NT4.0 is installed in the server and the
printer will be the first printer installed on the computer:
Go to step 11.
If the printer driver for Windows NT4.0 is not installed in the server and a
different printer is installed in the computer:
A message is displayed. If you click [OK], the window to select the printer
manufacturer and model will appear. Follow the same procedure of "If the
printer driver for Windows NT4.0 is not installed in the server:" and install
the printer driver for Windows NT4.0.
If the printer driver for Windows NT4.0 is not installed in the server and
the printer will be the first printer installed on the computer:
A message is displayed. If you click [OK], the window to select the printer
manufacturer and model will appear. Follow the same procedure of "If the
printer driver for Windows NT4.0 is not installed in the server:" and install
the printer driver for Windows NT4.0.
9
Select whether to use this printer as the default printer or not by select-
ing [Yes] or [No].
Note
If you install a printer to the computer for the first time, [Default printer]
setting will not appear, and the first printer installed will be the default
printer.
10
Click [Next].
The [Add Printer Wizard] window to perform the test print appears.
11
Select Whether to perform the test
print or not by selecting [Yes (rec-
ommended)] or [No].
Note
Printing the test page is also possible
after the installation of the printer driv-
er.