Konica Minolta BIZHUB PRO 1050 - Manual (Page 151)

7
PCL Printer Driver Setting (Windows)
7-22 bizhub PRO 1050
Binding - Trim
Cuts the edges of the output paper which is center-folded or saddle stitched.
The [Trim] cannot be set in the following cases:
x When [Saddle-Stitcher] is not available in [Options] tab.
x When an item other than [Multi Center Fold] is selected in [Special Func-
tions] tab - [Fold].
x When [Booklet] is not selected in [Setup] tab - [Print Type].
Output - Output Method - Print
Sets the normal printing.
Output - Output Method - Secure Print
If you print with the Secure Print feature, the printing does not start until you
input the Secure Print ID and the password on the copier's control panel.
To perform the Secure Print, you need to configure the settings for Confiden-
tial output on the copier. For more information on the Confidential output, re-
fer to "User’s Guide (Network Scanner)".
1
Open the file to be printed and select [File] - [Print] of application.
2
Click [Properties] to open the [Printing
Preferences] window.
3
Select [Secure Print] in the [Output Method].
4
Enter [Secure Print ID] and [Password].
- Secure Print ID: Enter the confidential box
name.
- Password: Enter the password.
5
Click [OK].
6
Click [OK] to close the [Printing Preferences] window.
7
Click [Print] to perform printing from the application.
8
Select [RECALL] tab on the control panel of the copier.