Konica Minolta BIZHUB PRO 1050 - Manual (Page 322)

11
PS3 Printer Driver setting (Mac OS X)
11-24 bizhub PRO 1050
Output - Output Mode - Wait Mode/Proof and Print
Outputs the test print and checks the current setting from the control panel
of copier. Use this when printing a large volume document, such as multiple
sets of pages.
1
Open the file to be printed and select [File] - [Print] of application.
2
Select [Security] from pop-up menu.
3
Select [Wait Mode] or [Proof and Print] in the [Output Mode].
4
Click [Print] to perform printing from the application.
- When the [Wait Mode] is selected, it stops without being printed.
- When the [Proof Print] is selected, only one part is printed and it
stops.
On the copier's control panel, the Mode Check screen appears.
- When the Mode Check screen is not displayed, press [MACHINE]
tab.
5
Confirm the current settings.
If you do not change any setting,
proceed to the step 8.
6
If necessary, press [Change] to
change settings.
7
Change the settings and press [OK].
The [MACHINE] tab appears.
8
Press [START] to resume the rest of the print job.