Konica Minolta BIZHUB PRO 1050 User Manual
Page 386
14
Utility Tool
14-40
bizhub PRO 1050
Setting Up an AS/400 System to Use lpd
When working with the output queue description (WORKOUTQD), there are
several fields that must be defined for the network interface card to function
properly as a remote printer device.
Use the following procedure to define fields for the network interface card to
make it function as a remote printer:
1
When prompted for the remote system, type INTNETADR so the AS/
400 recognizes the device as an IP device.
2
Port must be [PORT 1].
3
Connection type must be [IP].
4
Internet address must be the IP address of the network interface card.
5
Destination type must be [OTHER].
6
When prompted for transforming SCS to ASCII, type YES to allow the
AS/400 do the character translation.
7
Manufacturer type and model must be the print driver that goes with
your print controller.