Konica Minolta BIZHUB PRO 1050 - Manual (Page 389)

14
Utility Tool
14-43 bizhub PRO 1050
Setting Up System V Release 4 and Solaris 2.X to Use lpd
If your system recognizes the LPSYSTEM command, you do not need to in-
stall the dedicated utility, Konica Minolta's host-side software. Another op-
tion is the admintool if your system supports it.
LPSYSTEM Installation
The following procedure must be executed from the Bourne Shell.
Type: SH then press Enter to enter the Bourne Shell program.
Use the following procedures to install LPSYSTEM:
1
lpsystem -t bsd < Print server host name in /etc/hosts file >
2
lpadmin -p -s
!PORT1
Your system may want its IP address instead of the remote host name.
3
Enable
4
Accept
Printing on Linux
1
Start x terminal.
2
At the command prompt, enter the printtool command.
The Red Hat Print System Manager window opens.
3
Click the Add button.
The Add Printer Entry window opens.
4
Choose Remote Unix (lpd) Queue and click OK.
The Edit Remote Unix Queue Entry window opens.
5
Specify the following:
- The printer name
- The spooler directory (typically, /usr/spool/lpd/prntr-name)
- The IP address of the Network Interface Card (in the Remote Host
field)
-
PORT1 (in In the Remote Queue field)
- An input filter (optional)
- When you finish, click OK.
6
Restart the daemon by choosing lpd -> Restart lpd in the Print Server
Manager.