Konica Minolta BIZHUB PRO 1050 User Manual
Page 168
7
PCL Printer Driver Setting (Windows)
7-39
bizhub PRO 1050
Settings
When click this button, the [Image Shift Settings] dialog appears.
x
Switch Setup: It specifies whether the Image Shift sets up by the driver
side or the printer side.
x
Font Side: Set the shift amount for the front side.
x
Back Side: Set the shift amount for the back side.
x
Back Side Auto Setup: Set the amount of the back side as that of front
side.
Divide Output
Repeats to staple and/or fold for every number of pages specified.
Page per Section
When the [Divide Output] is selected, you can set the number of pages for
repeating the function.
Adhesive Binding
Selects when doing adhesive binding using an adhesive binder.
Normally, used together with the [Half Fold Out] setting.
Pile Permission
When another printed document remains in Stacker, gives the permission to
stack the output.
Setting the Pile Permission to OFF allows no pile on the stacker.
When a job the pile of which is not permitted is on the stacker, no pile is
made even if a pile permission is granted.