Konica Minolta BIZHUB PRO 1050 - Manual (Page 377)

14
Utility Tool
14-31 bizhub PRO 1050
Services will accept Bindery requests and respond just as if a Bindery exist-
ed on the NetWare server being accessed.
Be aware that information obtained from the Bindery query may not be
stored in the server since the Directory is a partitioned and distributed data-
base. Even though the NetWare 4.x-6 server is not operating from a Bindery,
the applications making Bindery requests will not know the difference.
NDS setup
PageScope Web Connection
See your system administrator about PageScope Web Connection.
Novell NWADMIN
Novell NWADMIN (NetWare Administration) is used to generate a directory
tree and print queue objects in the print server, printing system and tree.
The network interface card is provided with a plug-and-play feature to sup-
port NetWare administration utility (NWADMIN) that enables the NDS admin-
istrator to perform centralized management of print servers.
DETAILS
Refer to the Novell NetWare manual for details of Setup with NWADMIN.
PCONSOLE
NetWare allows the use of PCONSOLE as an alternative of NWADMIN.
PCONSOLE is used to set up static information of print servers regarding
which queues to service and to whom information is given in case of trouble.
DETAILS
Refer to the Novell NetWare manual for details of setup with PCONSOLE
of NDS.
Setup for Bindery Emulation
Make sure of the Bindery Context.
Before connecting the print server (network interface card) to the Novell
NetWare 4.x-6 server of Bindery mode, make sure that the NetWare server
contains the bindery context.
If the bindery context does not exist, the network administrator should mod-
ify the AUTOEXEC.NCF file to add an adequate SET command and restart
the NetWare server or enter a SET command from the console prompt to
make changes.
Note that any command entered following the console prompt is effective
immediately but the definition of the autoexec.ncf file becomes effective only
after turning off power and on again.