Konica Minolta BIZHUB PRO 1050 - Manual (Page 25)

2
Overview
2-4 bizhub PRO 1050
2.3.1 Parallel Connection
You can connect your Windows computer to the print controller via the par-
allel port (IEEE 1284).
Once you set up the printer driver in the computer, you can print from it.
You can use the copier as a network printer by executing a print server func-
tion or a printer sharing function on the computer that is connected to the
copier via parallel port.
Note
Refer to "Installation of the Printer Driver in the computer" on Page 3-1
for more information about installation of the printer driver.
2.3.2 Ethernet Connection
You can also connect the copier to computers supporting Ethernet.
Several alternatives can be considered in the Ethernet connection. In any of
them, you must set up the printer driver in each computer after configuring
the network (such as TCP/IP settings) for the print controller or the comput-
ers.
The following print patterns are shown here as examples.
x SMB printing, lpr/lpd printing, Direct printing, Raw (Port9100) printing
x Printing in which AppleTalk from Macintosh is used.
x IPP (Internet Printing Protocol) printing
x Printing in which Novell Netware is used.
Note
Refer to "Installation of the Printer Driver in the computer" on Page 4-1
for more information about installation of the printer driver.